|
|
Refrigerant Line Size Identifier
|
|
| #6
|
5/16"
|
Liquid hose: condenser to drier to evaporator
|
| #8
|
13/32"
|
Discharge hose: compressor to condenser
|
| #10
|
1/2"
|
Suction hose: evaporator to compressor
|
| (All hose kits include crimp collars)
|
Barrier Type Refrigerant Hose
|
All Vintage Air line kits use barrier type refrigerant line for use with HFC-134a and R-12 refrigerants. Includes adequate hose length to connect complete system, all O-ring fittings and crimp ferrules. 134a systems include fittings with service ports. Includes: 6ft. of #6, 4ft. of #8, 5ft. of #10 barrier hose. Standard or extra length kits available.
|
|
|
|
Standard Refrigeration Line Kit
|
| 31700-VUD
|
Hose kit with drier 134a
|
| 31702-VUD
|
Hose kit without drier 134a
|
| 31300-VUD
|
Hose kit with drier R-12
|
| 31302-VUD
|
Hose kit without drier R-12
|
| 31310-VUD
|
Hose kit with drier (for flare compressor)
|
| 31312-VUD
|
Hose kit without drier (for flare compressor)
|
| 31700-VBD
|
Hose kit with drier (for 134a beadlock)
|
| 31703-VBD
|
Hose kit without drier (for 134a beadlock)
|
| 31300-VBD
|
Hose kit with drier (for R-12 beadlock)
|
| 31302-VBD
|
Hose kit without drier (for R-12 beadlock)
|
| These kits can be sued with our aluminum bulkhead plates show on page 52 at left and are not included with hose kits. Call us for details.
|
Standard Heater Hose Kits
|
Choose straight or 90º firewall bulkhead fittings. Includes: 10 feet of 5/8" heater hose, 2 standard male O-ring 90 degree bulkhead fittings (or 2 standard straight bulkhead fittings), 2 female O-ring 90 degree fittings and 8 hose clamps.
|
|
| 31400-VUD
|
90º bulkhead fitting heater hose kit
|
| 31401-VUD
|
Straight bulkhead fitting heater hose kit
|
|
|
|
|
Low Pressure Switch
|
Automatically cuts current to compressor clutch when system runs low on refrigerant.
|
|
| 24903-VUS
|
90º bulkhead fitting heater hose kit
|
Switch Fitting
|
Pressure switch fitting. 3/8" female O-ring x 3/8" male O-ring w/ female switch installation fitting.
|
|
Trinary Switch
|
Combines fan pressure, low pressure and high pressure functions into one switch. 30lb. low pressure cutoff, 380 lb. high pressure cutoff. 220- lb. fan activation point.
|
|
| | |